Beoogd gebruik van Habasit lijmen

De volgende tabel is een overzicht van Habasit lijmen en hun belangrijkste toepassing. Het heeft betrekking, op enkele uitzonderingen na, op alle Thermofix lassen van Habasit.
Hier vindt u de overeenkomstige Material Safety Data Sheets.

Voor een beschrijving over de toepassing van de band of riem, of een uitleg over de lijmprocedure, raadpleeg de data sheet van het betreffende product.

Type

Composition

Use

Remarks

Example

Fixol

Methanolic resorcinol solution

Polyamide

All belts (PT and Conveyors) with PA traction layer

Polyamide based products

Fixol E

Ethanolic resorcinol solution

Polyamide

All belts (PT and Conveyors) with PA traction layer

Polyamide based products

Vulcol

Crosslinking rubber in MEK (contact adhesive)

Rubber part of belting

Only together with Fixol, for PT and conveyor belts with PA traction layer

Polyamide

  • Power transmission belts
  • Conveyor belts

Rubcol A+B

TPU resin in acetone and isocyanate

Rubber part of belting

So far used only together with Fixol. For belts with thick rubber coating (e.g. folder gluers). More flexible and better temperature resistance than Vulcol.

  • HAT-18PW
  • HAT-24PW
  • Polyamide Folder gluer belts

Polycol A+B

TPU resin in ethylacetate and isocyanate

Polyester and EPDM-rubber; Polycol B also used as EPDM-Primer

For Thermofix joining of conveyor belts with PET-fabric traction layer. All coatings including rubber are also glued with Polycol (no Vulcol/Polycol combination).

  • HAR-12E
  • HAL-12E
  • TPU conveyor belts
  • PVC conveyor belts

Silicone-Primer

Silica organic compound in propanol

Silicone coated belts

Primer for "RTV 108Q"

  • FAB-5ER 10
  • WVT-xxx silicone range
RTV 108Q

RTV-1 moisture curing silicone

Silicone coated belts

Joining silicone belts without thermoplastic layer or coating the TPU of welded fingers on silicone belt surface.

  • FAB-5ER 10
  • WVT-xxx silicone range

 

 

TRS Plasto PU
TRS Hardener 1000E

 

TPU resin in acetone and isocyanate

Gluing (guiding) profiles

Gluing TPU and PVC guiding/lateral profiles to the running or conveying side of belting.

V-guide profiles
Applying covers to belts

TRS Hardener 1000E

 

Isocyanate

EPDM-Primer

  • HAL-12E
  • SAG-12E
Balco Metallkleber

Polychloroprene in toluene / light naphtha (contact adhesive)

Applying friction cover to driving pulleys

Special application

Shelf Life

The expiry date is printed in the form mm.yyyy together with the batch number (e.g.: "exp 05.2010" means use before May 2010).

The expiration date applied to the chemicals supplied by Habasit indicates the time limit for which Habasit is confident that the condition of the chemical will provide optimal results for the task that it is intended perform. Beyond the indicated date, the degree of uncertainty for attaining optimal results exceeds our established confidence level for the chemical to do so as chemical efficacy tends to degrade over time based on relevant storage conditions. Maintaining chemicals in a cool, dark, dry place prior to use will help ensure optimal quality up to date of expiration.

Adhesive

Printed on

Polycol A

Tin and exterior packaging

Polycol B

Ampoule and exterior packaging

RTV 108Q

Tube

Vulcol

Exterior packaging and tube

Fixol

Directly onto adhesive container

Silicone Primer

Directly onto the glass bottle/label

Rubcol A

Tin and exterior packaging

Rubcol B

Ampoule and exterior packaging

Tempcol

Exterior packaging, resp. tube

TRS Plasto PU

Can

TRS Hardener 1000E

Cardboard box

Metall-Kontaktkleber (Balco ME)

No expiry date