Materiali di rivestimento

Our materials offer these features: 

Additional wear resistance
Covers that provide greater belt life in applications where abrasion can occur between the product conveyed and the belt conveying surface. Materials are available with various hardness and coefficient of friction values. 


Polyurethane


Natural rubber


Rubber

Antistatic feature
For the movement of sensitive parts where a static charge could have an adverse effect.


Antistatic fabric

Chemical resistance
Additional resistance to oils and chemicals up to 80 °C (polyurethane) and up to 110 °C in maximum (nitrile).  


Polyurethane


Nitrile

Compressibility
Closed and open cell foams and sponges in various thicknesses are used to squeeze, cradle and cushion products where design integrity and fragile materials require extra care. Actual density used will be based on application need. 


Polychloroprene sponge


Closed cell EVA foam


PU sponge

Food-grade covers
Covers added that offer good resistance to oils, acids and other conditions typically found in moving food related products. 


TPU


Felt


PVC


Nitrile

Good release
Covers that allow easy product release whether sticky or hot. 


EPDM rubber


PTFE

Heat resistant
Covers that allow hot products to be conveyed without effect on the thermoplastic urethane base belt. Depends on application specifics (temperature, time, etc.) and thickness of cover used.


Heatmate


NBR rubber


Nitrile

High friction
Covers grab, feed or move the product on horizontal or inclined conveyors.


NBR rubber


Natural rubber


PVC

Low friction
Covers that allow the conveying side to slip under accumulated load conditions. 


Polyamide fabric


Polyester fleece

Shock absorption
Covers that absorb shock when dropping products from one level to the next.